名稱：低臺式半自動貼面機
英文：Semi-automatic servo laminating machine
型號：HL-1300/1450/1650型
電源：AC 380V/50HZ
功率：6.0~6.KW
重量：3.0~3.5T
速度：0~100片/分鐘
裱貼精度：±1.5mm
主要性能：
◆整機采用PLC控制系統，較其它的延時器或中間繼電器控制相比，走紙更加精確穩定，且大大提高了速度，電路故障能自動顯示報警。
◆采用臺灣臺達伺服電機，取締了離合器、制動器及底光眼的信號轉換控制，實現了PLC、伺服單控獨立作業，速度快，精度高，易操 作。
◆底紙采用真空吸附自動走紙，可根據面紙的快慢以及連續性自動跟蹤，自動連續出紙。
◆定位方式采用先進的的彈性前規定位，定位精度高，底紙永不超前。面紙與底紙貼合時，對齊或面紙超前調整方便。
◆全自動膠水補充系統，可在貼合過程中自動補充消耗的膠量，并配合膠水物質循環回收，避免膠水損耗浪費。
◆計量輥線速度科學設計，避免高速運轉時甩膠。
◆壓合輥壓力均采用渦輪蝸桿同步調節，方便快速。
◆搖桿控制洗水輥的升降，方便清洗上膠部的下輥，清潔干凈徹底。
◆人性化設計計數器，方便記錄您每日的工作量，易于計件工作。
MAIN PERFORMANCE:
◆ Independent research and development,we are the first production enterprises of semi-automatic high-speed servo machine.
◆ The whole machine adopts PLC control system,compared with other delay device or intermediate relay control,paper feeding is more accurate and stable,and greatly improve the speed,circuit fault can automatically display alarm.
◆ Taiwan Delta servo motor is adopted to eliminate the signal conversion control of clutch,brake and bottom light eye,and realize the independent operation of PLC and servo single control,with fast speed,high precision and easy operation.
◆ The base paper adopts vacuum adsorption automatic paper feeding,which can automatically track the speed and continuity of the face paper and automatically continuous paper feeding.
◆Positioning method adopts advanced elastic front stop positioning,high positioning accuracy,and the base paper is never advance. When the face paper and the base paper laminate,the adjustment of alignment or face paper advance is convenient.
◆ Automatic glue supplement system,can automatically replenish the consumption of glue in the process of laminating,and with the glue recycling,to avoid glue loss and waste.
◆Scientific design of measuring roller linear speed,to avoid glue flying in high-speed.
◆ The pressure of the pressing roll is adjusted synchronously by turbine worm,which is convenient and fast.
◆ The rocker controls the lit of the washing roller,which is convenient to clean the lower rller of the glue feeding part and clean thoroughly.
◆ Humanzed design counter,convenient to record your daily workload,easy for piecework.
15530705522
490013837@qq.com